IP found
Blog Articles

009/HOe automatic turntable build

Article #18 - 25/10/2021 23:09
Turntable for 009/HOe layout.
Controlled by Arduino style chip, the motor is stepping on a 1/16 step, giving about 9 steps per degree, so hopefully accurate enough.
Need to add a limiting switch to initialise it. Also the firmware will prevent it from turning more than 360 degrees, so the power wires won't get tangled up.


Photos from the Blog articles

Click on an image to open the image gallery

Please note: the rights to any photos displayed remain with the owner of the photo, and if not my own, then they are used purely as examples and I take no credit for them.