009/HOe automatic turntable build
Article #18 - 25/10/2021 23:09Turntable for 009/HOe layout.
Controlled by Arduino style chip, the motor is stepping on a 1/16 step, giving about 9 steps per degree, so hopefully accurate enough.
Need to add a limiting switch to initialise it. Also the firmware will prevent it from turning more than 360 degrees, so the power wires won't get tangled up.
Controlled by Arduino style chip, the motor is stepping on a 1/16 step, giving about 9 steps per degree, so hopefully accurate enough.
Need to add a limiting switch to initialise it. Also the firmware will prevent it from turning more than 360 degrees, so the power wires won't get tangled up.
